Chemical Engineering View / zeta potential / Textuur analyse / Porometrie / Katalysator karakterisering / High shear rheometry / Batch High Shear Dispersing Emulsifier FME Series / homogenizer /lab / Meritics / Fluko / inline / Multishaft Mixers/Dispersers / Pigment Resin Technology /Low Sodium Cleaners / Ancillary Machine for Plastic Industry – Hydraulic Cutting M/C
|Powders like fumed silica, calcium carbonate,
titanium dioxide, gums, thickeners and many
pigments are notorious for driving up processing
costs. Even with a strong
vortex in an open vessel,
they resist wetting out and
often float on the surface
Ross has developed new
technology that enables
you to mix and wet out
powders almost instantly.
Available in either a batch
or in-line configuration, the
SLIM (Solid/Liquid Injection
Manifold) system injects
solids directly into the high shear rotor/stator,
where it is immediately wetted out and dispersed
into the liquid stream.
The SLIM system accelerates the mixing
process dramatically, while it virtually eliminates
dusting – minimizing the volume of airborne
particles released inside the plant atmosphere.
Model 405SB-25 In-line SLIM – Turn-key skid-mounted
Model 505 Stainless Steel High Shear Mixer with batch SLIM system: 5HP – While the mixer is running, the operator simply inserts
the feed tube into a container of powder and opens the feed valve. The
vacuum created by the specially modified rotor/stator generator draws the
powder through the tube and directly into the high shear zone. Dusting and delays are eliminated.